(1) Clean, degreas, and dry the shaded area
of the Rear Bumper with a degreasing
agent.
-7-
5. Assembly of
③
Outer LH and
⑧
Inner LH.
(The same applies to the RH side)
(1) Clean, degreas, and dry the inside of the
shaded area of the
③
Outer LH with a
degreasing agent.
③
Outer LH
Inside the shaded area
(2) Part of the double-sided tape liners on the
⑧
Inner LH is peeled off and fixed with
masking tape.
(3) Cover
⑧
Inner LH with
③
Outer LH.
(4) Insert the
⑬
Clip(Small) to secure it.
(5) Press
③
Outer LH against
⑧
InnerRH,
pull out the liner and crimp.
※
Assembly of
②
Outer RH and
⑦
Inner RH
in the same way .
⑧
Inner LH
③
Outer LH
⑧
Inner LH
Push
Push
Push
Pull out
③
Outer LH
⑧
Inner LH
⑬
Clip(Small)
Crimping
Muffler
Vehicle clip
【
Bottom view
】
6. Install the LH parts.
( Same for RH parts )
※
Do not reuse vehicle clip.
(2)
Remove the vehicle clips from the Rear
Bumper.