(1) Insert the
⑨
U-nut at the position shown
on the left.
(4) Clean, degreas, and dry the shaded area
of the Rear Bumper with a degreasing agent.
(5) Cover the Rear Bumper with the
⑥
Inner side
LH, align the holes, and crimp.
※
Press it against the mounting reference
of the Rear Bumper.
(6) Temporarily fix the
⑥
Inner side LH with
⑩
Bolt.
※
Since the work space is small,
pull down the Rear Bumper to work.
(7) Pull out the liners of the double-sided tape
and crimp it to the Rear Bumper.
※
Remove the masking tape that secures
the U-nut.
-5-
⑨
U-nut
【
Back side view
】
【
Bottom view
】
※
Install the
⑤
Inner side RH in the same
way.
3. Install the
⑥
Inner side LH.
⑫
Washer
⑪
Clip(Large)
Peel off all
Crimping
Crimping
Crimping
Rear Bumper
Push
Push
Masking tape
⑥
Inner side LH
⑥
Inner side LH
⑥
Inner side LH
⑩
Bolt
Pull out
Mounting reference
(3) Part of the double-sided tape liners on the
⑥
Inner side LH is peeled off and fixed with
masking tape.
※
For short double-sided tape (2 places),
peel off all the liners from the
double-sided tape.
(8) Fully tighten the
⑩
Bolt.
(9) Attach the
⑫
Washer to the
⑪
Clip(Large)
and secure it to the Rear Bumper.
Muffler
Align the holes
Reference tightening torque 2.0N
・m
( 0.2kgf
・m
)
( Same for
⑤
Inner side RH )
(2) Turn the
⑥
Inner side LH over and fix it with
masking tape so that the U-nut does not fall.