-3-
10mm
Ⓐ
Ⓐ
※
Do not reuse vehicle clip.
Vehicle clip ×5
④
Inner center
⑤
Inner side RH
⑥
Inner side LH
1. Make a hole in the Rear Bumper.
⑫
Washer
【
Bottom view
】
(1)
Remove the vehicle clip from the Rear
Bumper. ( 5 places )
(2) Attach 3 Inner parts to the Rear Bumper with
⑪
Clip(Large) and
⑫
Washer. ( 5 places )
⑪
Clip(Large)
(3) Move the 5 holes of the parts to the Rear
Bumper with a needle.
Holes ×5
3mm Drill ×5
(4) Remove the clip from the Rear Bumper and
remove the 3 Inner parts.
(5) Drill a 3 mm hole in the center of the mark
position. ( 5 places )
※
The position of
Ⓐ
penetrates to the
Rear Bumper. ( 2 places )
(6) Remove the Rear fog cover from the
Rear Bumper.
8mm Drill ×3
8mm Drill ×2
Rear fog cover
Rear Bumper
20mm Hole saw ×2
Rear Bumper
Masking tape
(7) Make 8mm holes in the Rear fog cover
( 3 places ) and the Rear Bumper ( 2 places ).
※
Wrap masking tape 10 mm from the tip
of the drill.
(8) Using a Hole saw, make a 20mm hole
in the 3mm hole made in step (5).
( 2 places )
Installation procedure