Subaru 2014 Impreza STI, Руководство пользователя

Страница: 46 / 418

2. After drawing out the seatbelt, pass it
through the belt guide as follows: First
insert one edge of the belt into the open
gap in the belt guide; then slide the rest of
the belt in, so that the whole belt fits
inside. 3. After confirming that the webbing is not
twisted, insert the connector (tongue)
attached at the webbing end into the
buckle on the right-hand side until a click
is heard.
If the belt stops before reaching the
buckle, return the belt slightly and pull it
out more slowly. If the belt still cannot be
unlocked, let the belt retract slightly after
giving it a strong pull, then pull it out slowly
again.
4. Insert the center seatbelt tongue plate
into the center seatbelt buckle marked
“
CENTER
”
on the left-hand side until it
clicks.
5. To make the lap part tight, pull up on
the shoulder belt.
Seat, seatbelt and SRS airbags/Seatbelts
1-17
–
CONTINUED
–