Subaru 2014 Impreza STI, Руководство пользователя

Страница: 257 / 418

7-12
Starting and operating/Remote engine start system (dealer option)
start.
!
To disengage the service mode
Turn the ignition switch to the
“
ON
”
position, depress and hold the brake
pedal, then press and release the
“ ”
button on the remote engine start trans-
mitter three times. The system will pause
for 1 second and flash the turn signal
lights once indicating that the system has
exited service mode.
NOTE
When taking your vehicle in for service,
it is recommended that you inform the
service personnel that your vehicle is
equipped with a remote engine start
system.
&
Remote engine start trans-
mitter programming and pro-
grammable feature option
New transmitters can be programmed to
the remote engine start system in the
event that remote engine start transmitters
are lost, stolen or damaged. The remote
engine start system also has one pro-
grammable feature that can be adjusted
for user preference.
The remote engine start system can be
programmed to either make an audible
horn chirp upon remote start activation or
not. Remote engine start transmitter pro-
gramming and feature programming can
be adjusted using the following procedure.
1. Open the driver
’
s door (the driver
’
s
door must remain opened throughout the
entire process).
2. Insert the key into the vehicle
’
s ignition
switch and turn to the
“
ON
”
position.
3. Locate the small black programming
button behind the fuse box cover, on the
driver
’
s side left under the dashboard
panel.
4. Press and hold the black programming
button for 10 to 15 seconds. The horn will
honk and the turn signal lights will flash
three times to indicate that the system has
entered programming mode. At this point
you can proceed to either step 5 or step 6.
5. To program a remote engine start
transmitter: press and release the
“ ”
button on each transmitter. The horn will
honk and the turn signal lights will flash
one time to indicate a successful trans-
mitter learn each time the
“ ”
button is
pressed. You can program up to eight
transmitters.
6. To toggle the Horn Confirmation chirps
ON/OFF: depress and release the brake
pedal to toggle the feature. The horn will
chirp and the turn signal lights will flash
one time to indicate Confirmation Horn
Chirps are
“
OFF
”
. The horn will honk and
the turn signal lights will flash 2 times to
indicate Confirmation Horn Chirps are
“
ON
”
. Depressing the brake pedal repeat-
edly will toggle the feature ON or OFF
each time.
7. To exit the remote engine start trans-
mitter and feature programming mode,
turn the ignition switch to the
“
LOCK
”
position, remove the key from the ignition
switch and test operation of the remote
engine start transmitter(s) and horn con-
firmation feature.
&
System maintenance
!
Changing the batteries
CAUTION
.
Do not let dust, oil or water get on
or in the remote engine start
transmitter when replacing the
battery.
.
Be careful not to damage the
printed circuit board in the re-
mote engine start transmitter
when replacing the battery.
.
Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
.
There is a danger of explosion if