Subaru 2013 Legacy, Руководство пользователя

Страница: 400 / 510

Black plate (407,1)
北 米
Model "A2490BE-A" EDITED: 2012/ 4/ 25
to
“
ON
”
.
NOTE
If the power does not switch even
though the above procedure was fol-
lowed precisely, contact your SUBARU
dealer.
&
Starting engine
1. Apply the parking brake.
2. Shift the select lever into the
“
P
”
position.
3. Depress the brake pedal.
4. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound. At the same
time, the push-button ignition switch turns
to the
“
Acc
”
or
“
ON
”
position.
5. Within 5 seconds after the push-button
ignition switch turns to the
“
Acc
”
or
“
ON
”
position, while depressing the brake ped-
al, press the push-button ignition switch.
NOTE
If the engine does not start even
though the above procedure was fol-
lowed precisely, contact your SUBARU
dealer.
Trunk lid (Legacy)
–
if the
trunk lid cannot be opened
NOTE
If you open the trunk lid with a key
while the alarm system is armed, the
alarm system is triggered and the
vehicle
’
s horn sounds. In this case,
perform any of the following opera-
tions.
.
Press any button on the remote
transmitter.
.
Insert the key into the ignition
switch and turn the ignition switch to
the
“
ON
”
position.
For details about the alarm system,
refer to
“
Alarm system
” F
2-25.
The trunk lid can also be opened using the
key.
In case of emergency
9-21
–
CONTINUED
–
9