Subaru 2013 Legacy, Руководство пользователя

Страница: 243 / 510

Black plate (246,1)
北 米
Model "A2490BE-A" EDITED: 2012/ 4/ 25
5-26
Audio
Type A audio
Type B audio
2. Press the AUX input selection button
“
CD/AUX
”
on the audio control panel to
select the AUX mode. Refer to
“
When CD
is in the player
” F
5-21.
3. Play back the portable audio player.
Refer to the instruction manual of the
portable audio player.
NOTE
.
The output sound of the portable
audio player is not loud, and the sound
via the vehicle
’
s speakers that are
connected to the vehicle audio set is
very low. If you turn up the volume of
the audio set, the volume becomes
louder. However, when you change
the player to the other portable audio
player, the sound may become a lot
louder. Turn down the volume when
you change between them.
.
In some cases, when the sound
volume of the portable audio player is
low, the sound quality may become
impaired when you turn up the volume
of the vehicle audio system. In this
case, adjust the sound volume of the
portable audio player.
.
In some cases, noise occurs be-
cause of a bad connection between the
portable player and the audio system.
Try cleaning the stereo jack and audio
plug.
.
If noise is not reduced, check for
disconnection of the cord or a malfunc-
tion of the portable player.
Precautions to observe when
handling a compact disc
Use only compact discs (CDs, CD-Rs and
CD-RWs) that have the mark shown in the
following illustration. Also, some compact
discs cannot be played.