Subaru 2013 Legacy, Руководство пользователя

Страница: 123 / 510

Black plate (124,1)
北 米
Model "A2490BE-A" EDITED: 2012/ 4/ 25
2-26
Keys and doors
&
Activating and deactivating
the alarm system
To change the setting of your vehicle
’
s
alarm system for activation or deactiva-
tion, do the following.
1. Disarm the alarm system. Refer to
“
Disarming the system
” F
2-29.
2. Sit in the driver
’
s seat and shut all
doors (and the rear gate (Outback)).
3. Turn the ignition switch to the
“
ON
”
position.
4. Hold down the REAR (UNLOCK) side
of the driver
’
s power door locking switch,
open the driver
’
s door within the following
1 second, and wait 10 seconds without
releasing the switch. The setting will then
be changed as follows:
If the system was previously activated:
The trip meter screen displays as follows
and the horn sounds twice, indicating that
the system is now deactivated.
. “
ALOF
”
(models with type A combina-
tion meter)
. “
AL oF
”
(models with type B combina-
tion meter)
If the system was previously deacti-
vated:
The trip meter screen displays as follows
and the horn sounds once, indicating that
the system is now activated.
. “
ALON
”
(models with type A combina-
tion meter)
. “
AL on
”
(models with type B combina-
tion meter)
NOTE
You may have the above setting
change done by your SUBARU dealer.
&
If you have accidentally trig-
gered the alarm system
!
To stop the alarm
Perform any of the following operations.
.
Press any button on the access key/
remote transmitter.
.
Turn the ignition switch to the
“
ON
”
position.
.
Turn the push-button ignition to the
“
Acc
”
position (models with
“
keyless ac-
cess with push-button start system
”
).
.
Carry the access key and press the
rear gate opener button (if equipped).
.
Carry the access key and press the
door lock button (if equipped).
&
Arming the system
NOTE
.
The system can be armed even if the
engine hood, the windows and/or
moonroof are open. Always make sure
that they are fully closed before arming
the system.
.
The 30-second standby time can be
eliminated if you prefer. Have it per-
formed by your SUBARU dealer.
.
If your vehicle is a Legacy and you
open the trunk using the remote trans-
mitter
’
s
“ ”
button with the alarm
system armed, the system will be
temporarily placed in a standby state.
The system will go back to the surveil-
lance state upon locking the trunk.
.
The system is in the standby mode
for a 30-second period after locking the
doors with the remote transmitter. The
security indicator light will flash at
short intervals during this period.
.
If any of the following actions is
done during the standby period, the
system will not switch to the surveil-
lance state.
–
Doors are unlocked using the
remote transmitter.
–
Doors are unlocked using the
k e y l e s s a c c e s s f u n c t i o n ( i f
equipped).