Subaru 2013 Legacy, Руководство пользователя

Страница: 399 / 510

Black plate (406,1)
北 米
Model "A2490BE-A" EDITED: 2012/ 4/ 25
9-20
In case of emergency
Access key
–
if access key
does not operate properly
CAUTION
Keep metallic objects, magnetic
sources and signal transmitters
away from the area between the
access key and the push-button
ignition switch. They may interfere
with the communication between
the access key and the push-button
ignition switch.
If the locking/unlocking procedures, power
switch procedures or engine start proce-
dures cannot be operated because of
strong radio signals in the surrounding
area or a low battery condition of the
access key, perform the following proce-
dure. When the battery of the access key
is discharged, replace it with a new one.
Refer to
“
Replacing battery of access key
”
F
11-54.
&
Locking and unlocking
1) Knob
2) Mechanical key
While pulling the knob of the access key,
take out the mechanical key.
Lock or unlock the driver
’
s door with the
mechanical key in the procedure de-
scribed in
“
Locking and unlocking from
the outside
” F
2-6.
NOTE
After locking or unlocking, be sure to
attach the mechanical key back to the
access key.
&
Switching power
1. Apply the parking brake.
2. Shift the select lever into the
“
P
”
position.
3. Depress the brake pedal.
4. Hold the access key with the buttons
facing you, and touch the push-button
ignition switch with it.
When the communication between the
access key and the vehicle is completed,
a chime (ding) will sound. At the same
time, the status of the push-button ignition
switch changes to either of the following.
.
When the keyless access with push-
button start system is deactivated:
“
Acc
”
.
Under other conditions:
“
ON
”
5. When the keyless access with push-
button start system is deactivated, press
the push-button ignition switch with the
brake pedal released. The status of the
push-button ignition switch then changes