Subaru 2011 Outback, Руководство пользователя

Страница: 396 / 495

Black plate (411,1)
一 般
Model "A2470GE-B" EDITED: 2010/ 9/ 24
the engine oil and oil filter. Fully trained
mechanics are on standby at a
SUBARU dealer to utilize the special
tools, spare parts and recommended
oil for this work, and also, used oils are
properly disposed of.
.
If performing oil replacement your-
self, observe the local regulations and
dispose of waste oil properly.
.
For diesel engine models, the en-
gine oil replacement data that is stored
in the on-board computer should be
reset using a special tool every time
engine oil and the oil filter are replaced.
If the data is not reset, the diesel
particulate filter warning light does
not operate properly. To reset the data
of the on-board computer without a
special tool, see the following item.
!
Resetting the oil replacement data
(diesel engine models)
After engine oil and the oil filter have been
replaced, the oil replacement data should
be reset. To reset the data without a
special tool, perform the following proce-
dures.
1. Depress the brake pedal.
2. Start the engine, and keep it in idling.
3. Release the clutch pedal.
4. With depressing the brake pedal, per-
form the following:
(1) Push the rear window defogger
switch to ON.
Left-hand drive models
Right-hand drive models
(2) Turn the headlight switch to the
position.
(3) Push the rear window defogger
switch to OFF.
(4) Turn the headlight switch to OFF.
(5) Repeat steps 1) through 4) once
more, and go to next step.
(6) Release the brake pedal.
Maintenance and service
11-21
–
CONTINUED
–
11