Subaru 2011 Outback, Руководство пользователя

Страница: 53 / 495

Black plate (56,1)
一 般
Model "A2470GE-B" EDITED: 2010/ 9/ 24
1-28
Seat, seatbelt and SRS airbags
approximately 6 seconds when the igni-
tion switch is turned to the
“
ON
”
position.
The following components are monitored
by the indicator.
.
Front sub sensor (right-hand side)
.
Front sub sensor (left-hand side)
.
Airbag control module (including im-
pact sensor)
.
Frontal airbag module (driver
’
s side)
.
Frontal airbag module (front passen-
ger
’
s side)
.
Knee airbag module (Australia models)
.
Center pillar impact sensor (right-hand
side
–
if equipped)
.
Center pillar impact sensor (left-hand
side
–
if equipped)
.
Side airbag module (driver
’
s side
–
if
equipped)
.
Side airbag module (front passenger
’
s
side
–
if equipped)
.
Rear wheel house impact sensor (right-
hand side
–
if equipped)
.
Rear wheel house impact sensor (left-
hand side
–
if equipped)
.
Curtain airbag module (right-hand side
–
if equipped)
.
Curtain airbag module (left-hand side
–
if equipped)
.
Seatbelt pretensioner (driver
’
s side)
.
Lap belt pretensioner (driver
’
s side
–
except Australia models)
.
Seatbelt pretensioner (front passen-
ger
’
s side)
.
All related wiring
WARNING
If the warning light exhibits any of
the following conditions, there may
be a malfunction in the seatbelt
pretensioners, lap belt pretensioner
and/or SRS airbag system. We re-
commend that you have the system
checked immediately by your near-
est SUBARU dealer. Unless checked
and properly repaired, the seatbelt
pretensioners and/or SRS airbags
will operate improperly (e.g. SRS
airbags may inflate in a very minor
collision or not inflate in a severe
collision), which may increase the
risk of injury.
.
Flashing or flickering of the warn-
ing light
.
No illumination of the warning
light when the ignition switch is
first turned to the
“
ON
”
position
.
Continuous illumination of the
warning light
.
Illumination of the warning light
while driving
&
System servicing
WARNING
.
When discarding a seatbelt re-
tractor assembly or scrapping
the entire vehicle damaged by a
collision, we recommend that
you consult your SUBARU deal-
er.
.
Tampering with or disconnecting
the system
’
s wiring could result
in accidental activation of the
seatbelt pretensioner and/or
SRS airbag or could make the
system inoperative, which may
result in serious injury. Do not
use electrical test equipment on
any circuit related to the seatbelt
pretensioner and SRS airbag
systems. For required servicing
of the seatbelt pretensioner, we
recommend that you consult
your nearest SUBARU dealer.
CAUTION
The front sub sensors are located
on both the right and left sides at the
front of the vehicle, and the SRS
airbag control module including the
impact sensor is located under the