Black plate (367,1)
一
般
Model "A2470GE-B" EDITED: 2010/ 9/ 24
tire.
13. Once a tire inflation pressure of at
least 180 kPa (1.8 kgf/cm
2
, 26 psi) has
been reached, perform the following pro-
cedure.
.
Switch the compressor to
“
0
”
.
.
Pull the power plug from the acces-
sory power outlet.
.
Quickly unscrew the hose from the
tire valve and install the protective cap.
Fasten the valve cap again.
.
Leave the bottle in the holder. This
avoids unexpected leakage of sealant
residue.
.
The kit will be needed again when
you check the tire pressure.
14. Immediately start the engine and drive
the vehicle for approximately 3 km (2
miles) so that the sealant can seal the
damaged area.
WARNING
.
Do not drive for more than 10
minutes and do not drive any
faster than 80 km/h (50 mph)
(observe the label indicating the
maximum permissible speed).
.
Do not use tire chains on a sealed
tire.
.
Do not tow a trailer.
.
If heavy vibrations, unsteady
steering behavior or noises oc-
cur while driving, reduce your
speed and drive with caution to a
location where it is safe for you
to stop the vehicle. Recheck the
tire and its pressure. If the tire
pressure is less than 130 kPa (1.3
kgf/cm
2
, 19 psi) or if there are any
cracks, bumps or similar tire
damage visible, do not continue
to use the tire.
Step 2: Adjusting the tire pressure
1. Stop the vehicle after driving approxi-
mately 3 km (2 miles). Check and, if
necessary, adjust the pressure of the
damaged tire.
1)
Protective cap
2)
Hose
3)
Pressure relief valve
2. Remove the protective cap from the
end of the hose.
3. Screw the hose firmly onto the valve of
the damaged tire.
In case of emergency
9-17
–
CONTINUED
–
9
Содержание 2011 Outback
Страница 473: ...Black plate 490 1 Model A2470GE B EDITED 2010 9 24 13 6 Supplement Receiver for the keyless entry system...
Страница 477: ...Black plate 494 1 Model A2470GE B EDITED 2010 9 24 13 10 Supplement Bluetooth module...
Страница 482: ...Black plate 27 1 Model A2470GE B EDITED 2010 9 22 Index 14...