Subaru 2010 Impreza, Руководство пользователя

Страница: 251 / 420

7-26
Starting and operating
performing the above procedure, refer to
“
Shift lock release using the shift lock
release button
” F
7-26.
!
Shift lock release using the shift
lock release button
Perform the following procedure to release
the shift lock.
1. Apply the parking brake and stop the
engine.
2. Remove the shift lock cover using a
flat-head screwdriver. The shift lock re-
lease button is located under the shift lock
cover.
NOTE
To prevent damage to the shift lock
cover, cover the tip of the flat-head
screwdriver with vinyl tape or a cloth
before removing the cover.
3. While depressing the brake pedal,
insert a screwdriver into the hole, press
the shift lock release button using a
screwdriver, and then move the select
lever.
If the select lever does not move after
performing the above procedure, the shift
lock system may be malfunctioning. Con-
tact a SUBARU dealer for an inspection
as soon as possible.
&
Selection of manual mode
With the vehicle either moving or station-
ary, move the select lever from the
“
D
”
position to the manual gate then move it to
the
“
+
”
end or
“ − ”
end of the manual gate
to select manual mode.