Subaru 2010 Impreza, Руководство пользователя

Страница: 126 / 420

nation after the driver
’
s door is opened,
the illumination will be turned off.
.
Even during the gradual turning off
after the ignition switch is turned to the
“
LOCK
”
position, if the ignition switch
is turned to the
“
ON
”
position, the
combination meter illuminate as usual.
To change the setting:
1. Turn the ignition switch to the
“
LOCK
”
or
“
Acc
”
position.
2. Press the trip knob to show
“ ”
or
“ ”
on the odometer and trip meter
display. The display can be switched as
shown in the following illustration by
pressing the trip knob.
*:
“ ”
or
“ ”
, and
“ ”
or
“ ”
cannot
be displayed when the ignition switch is
in the
“
ON
”
position.
3. To change the current setting, press
the trip knob for at least 2 seconds.
: Activated
: Deactivated
NOTE
The initial illumination setting of the
meter/gauge needles of your vehicle
has been set for activation
“ ”
at the
time of shipment from the factory.
&
Speedometer
The speedometer shows the vehicle
speed.
&
Odometer/Trip meter
1) Trip knob
This meter displays the odometer and two
trip meters when the ignition switch is in
the
“
LOCK
”
,
“
Acc
”
or
“
ON
”
position.
If you press the trip knob when the ignition
switch is in the
“
LOCK
”
position, the
odometer/trip meter will light up. It is
possible to switch the indications while
the odometer/trip meter is lit up. If you do
not press the trip knob within 10 seconds
of illumination of the odometer/trip meter,
the odometer/trip meter will turn off.
The display can be switched as shown
below by pressing the trip knob.
Instruments and controls
3-7
–
CONTINUED
–