Subaru 2010 Impreza, Руководство пользователя

Страница: 175 / 420

4-8
Climate control
Automatic climate control
system (if equipped)
Although this climate control system can
be used as a full-automatic climate control
system, it can also, if desired, be used as
a semi-automatic climate control system.
When it is used as a full-automatic climate
control system, the outlet air temperature,
fan speed, air flow distribution, air inlet
control, and air conditioner compressor
operation are all automatically controlled
to maintain a constant, comfortable tem-
perature inside the vehicle.
NOTE
.
Operate the automatic climate con-
trol system when the engine is running.
.
When the engine coolant is cold, the
blower does not run.
.
In the
“
AUTO
”
mode, when the air
temperature in the passenger compart-
ment is sufficiently cool, the air condi-
tioner compressor does not operate.
For efficient defogging or dehumidify-
ing in cold weather, press the
“
A/C
”
button to operate the air conditioner
compressor.
.
Even when cooling is not necessary,
setting the temperature much lower
than the current outlet air temperature
turns on the air conditioner compres-
sor automatically and the
“
A/C
”
indi-
cator light on the air conditioner button
illuminates.
&
Control panel
1) Temperature control dial
2) Fan speed control dial
3) Air flow control dial
4) Control switch of the defogger and deicer
system (Refer to
“
Defogger and deicer
”
F
3-45.)
5) Air inlet selection button
6) Air conditioner button
&
To use as full-automatic cli-
mate control system
Place the temperature control dial in the
position for your desired temperature, then
set the other dials and buttons as de-
scribed in the following. The system
’
s
functions will then switch to AUTO mode
and be controlled automatically.
.
Air flow control dial: AUTO position
.
Fan speed control dial: AUTO position
&
To use as semi-automatic
climate control system
Each function can be individually set to
AUTO mode independently of the others.
Any function set to AUTO mode is con-
trolled automatically. Any function not set
to AUTO mode can be manually adjusted
as desired.
The temperature can be set within a range
of 65 to 85
8
F (20 to 30
8
C).