Subaru 2007 Forester, Руководство пользователя

Страница: 95 / 357

2-6
Keys and doors
Power door locking switches
1) Lock
2) Unlock
All doors and the rear gate can be locked
and unlocked by the power door locking
switches located at the driver ’ s side and
the front passenger ’ s side doors.
To lock all the doors and the rear gate,
push the “ LOCK ” side of the switch.
To unlock all the doors and the rear gate,
push the “ UNLOCK ” side of the switch.
When you close the doors after you set
the door locks, the doors remain locked.
NOTE
Make sure that you do not leave the key
inside the vehicle before locking the
doors from the outside using the pow-
er door locking switches.
Key lock-in prevention func-
tion
This function prevents the doors from be-
ing locked with the key still in the ignition
switch.
Behavior with key lock-in preven-
tion function operative
With the driver ’ s door open, the doors are
automatically kept unlocked even if the
door locking switch is pushed to the
“ LOCK ” side.
Behavior with key lock-in preven-
tion function non-operative
If the lock lever is turned to the rear
( “ LOCK ” ) position with the driver ’ s door
open and the driver ’ s door is then closed
with the lock lever in that position, the driv-
er ’ s door is locked.
If the spare key is used to lock the driv-
er ’ s door from the outside of the vehicle,
the door is locked.
NOTE
When leaving the vehicle, make sure
you are holding the key before locking
the doors.
Remote keyless entry sys-
tem
This device complies with Part 15 of
the FCC Rules and with RSS-210 of In-
dustry Canada. Operation is subject to
the following two conditions: (1) This
device may not cause harmful interfer-
ence, and (2) this device must accept
any interference received, including in-
terference that may cause undesired
operation.
Changes or modifications not express-
ly approved by the party responsible
for compliance could void the user ’ s
authority to operate the equipment.
Two transmitters are provided for your ve-
1
2
200807
Do not expose the transmitter to
severe shocks, such as those ex-
perienced as a result of dropping
or throwing.
Do not take the transmitter apart
except when replacing the bat-
tery.
Do not get the transmitter wet. If it
gets wet, wipe it dry with a cloth
immediately.