Subaru 2007 Forester, Руководство пользователя

Страница: 177 / 357

5-22
Audio
Channel preset
Presetting a channel with a preset button
(21) allows you to select that station in a
single operation. Up to six SR1, SR2 and
SR3 channels each may be preset.
Press one of the preset buttons for at
least 2 seconds to store the channel. The
number of the channel will flash once on
the display, and the unit produces a beep
sound at this time.
Channel scan
Press the “ SCAN ” (18) button to change
the radio to the SCAN mode. In this mode,
the radio scans through the channel until
a station is found. The radio will stop at the
station for five seconds while displaying
the channel number, after which scanning
will continue until the entire channel has
been scanned from the low end to the high
end. Press the “ SCAN ” button (18) again
to cancel the SCAN mode and to stop on
any displayed station.
When the “ SCAN ” button is pressed for
automatic tuning, stations are scanned in
the direction of upward only.
Category mode
Press the “ CAT ” button (20) for at least 2
seconds to turn the category mode on. In
this mode, the radio operations (channel
selection, channel scan) are performed
only in the selected category. To cancel
the category mode, press the “ CAT ” but-
ton (20) for at least 2 seconds again.
Band selection
Push the “ SAT ” button (19) when the radio
is on to select SR1, SR2 or SR3 reception.
Each time this button is pressed, the band
will change in the following order:
iPod mode
Press the “ CD/AUX ” button to select the
“ iPod mode ” (when the iPod is connected
to the AUX terminal). Operation of “ iPod
mode ” is the same as that for the CD
changer mode.
AUX mode
Press the “ CD/AUX ” button (16) to select
the “ AUX mode ” (when the AUX unit is
connected to the AUX terminal).
SR1 SR2 SR3