Subaru 2004 Forester, Руководство по обслуживанию

Страница: 410 / 622

SL-16
SECURITY AND LOCK
Keyless Entry System
2. CHECK TRANSMITTER BATTERY
3. CHECK FUSE
The room light and ignition switch illu-
mination operation does not activate. 1. Check the room light operation. <Ref. to SL-20, CHECK ROOM
LIGHT OPERATION, INSPECTION,
Keyless Entry System.>
2. Check the ignition switch illumination circuit. <Ref. to SL-21, CHECK IGNITION
SWITCH ILLUMINATION CIRCUIT,
INSPECTION, Keyless Entry Sys-
tem.>
3. Replace the keyless entry control module.
(without double lock) <Ref. to SL-39, Keyless Entry Control
Module.>
4. Replace the double lock module. (with double
lock) <Ref. to SL-40, Double Lock Mod-
ule.>
Step Check Yes No
1 CHECK TRANSMITTER BATTERY.
1) Remove the battery from transmitter. <Ref.
to SL-41, REMOVAL, Keyless Transmitter.>
2) Check the battery voltage. <Ref. to SL-41,
INSPECTION, Keyless Transmitter.>
NOTE:
If the transmitter battery voltage is 2.5 V or less,
the range of transmission becomes very short.
Is the voltage more than 2.5 V? If further inspec-
tion is necessary,
refer to “SYMP-
TOM CHART”.
<Ref. to SL-15,
SYMPTOM
CHART, INSPEC-
TION, Keyless
Entry System.>
Replace the trans-
mitter battery.
Step Check Yes No
1 CHECK FUSE.
Remove and visually check the fuse No. 2 (in
the main fuse box), No. 3 (in the fuse and relay
box) and SBF-6 (in the main fuse box)
Is the fuse blown out? Replace the fuse
with a new one. Check the power
supply and ground
circuit. <Ref. to
SL-17, CHECK
POWER SUPPLY
AND GROUND
CIRCUIT,
INSPECTION,
Keyless Entry Sys-
tem.>
Symptom Repair order Reference