Subaru Robin Industrial Products WORMS EXPLORER 6510 XL27, Инструкция по эксплуатации

Страница: 7 / 24

7
Be extremely careful that all necessary electrical grounding procedures are followed during each
and every use. Failure to do so can be fatal.
Do not contact the generator to a commercial power line. Connection to a commercial
power line may short circuit the generator and ruin it or cause electric shock hazard.
Use the transfer switch for connecting to domestic circuit. In the special case
where the generator will be connected as stand by to the commercial network, the
installation must be carried out by a qualified electrician taking into account the
technical specifications of the generator and the commercial network.
No smoking while handling the battery. The battery emits flammable hydrogen gas,
which can explode if exposed to electric arcing or a naked flame. Keep the area well-
ventilated and keep naked flames/sparks away when handling the battery.
engine becomes extremely hot during and for some time after operation.
Keep combustible materials well away from generator area. Be very careful
not to touch any parts of the hot engine especially the muffler area or
serious burns may result.
Keep children and all bystanders at a safe distance from work areas.
It is absolutely essential that you know the safe and proper use of the
power tool or appliance that you intend to use. All operators must read,
understand and follow the tool/appliance owners manual. Tool and appliance
applications and limitations must be understood. Follow all directions given
on labels and warnings. Keep all instruction manuals and literature in a safe
place for future reference.
Use only «Homologated» extension cords according to CeI 245-4. When a tool or appliance is
used outdoors, use only extension cords marked «For Outdoor Use». extension cords, when not
in use should be stored in a dry and well ventilated area.
Always switch off generator’s circuit breaker and disconnect tools or appliances when not in use,
before servicing, adjusting, or installing accessories and attachments.