Subaru Robin Industrial Products WORMS EXPLORER 6510 XL27, Инструкция по эксплуатации

Страница: 19 / 24

19
10. ‘‘how-to’’ MAIntenAnce
10.1. enGIne oIL chAnGe
•
Change engine oil every 100 hours. (For new engine, change oil after 20 hours.)
1. Drain oil by removing the drain plug and the oil
filler cap while the engine is warm.
2. Reinstall the drain plug and fill the engine with oil
until it reaches the upper level on the oil filler cap.
Oil Drain Plug
•
Use fresh and high quality lubricating oil to the specified level as directed on page 9. If contaminated
or deteriorated oil is used or the quantity of the engine oil is not sufficient, the engine damage will
result and its life will be greatly shortened.
10.2. serVIcInG the AIr cLeAner
Maintaining an air cleaner in proper condition is very important. Dirt induced through improperly
installed, improperly serviced or inadequate elements damages and wears out engines. Keep the
element always clean.
urethAne foAM DuAL eLeMent tYpe
•
urethAne foAM cLeAnInG: work and clean the urethane foam with detergent. After cleaning,
dry it. Clean the urethane foam element every 50 hours.
•
seconD eLeMent: clean by tapping gently to remove dirt and blow off dust. Never use oil. Clean
the paper element every 50 hours of operation, and replace element set every 200 hours.
Dual Element Type
Air Filter
Covercle
Air
Filter
Frame
Urethane
Foam
Paper Element
Clean and replace air cleaner elements more often when operating in dusty environments.