Page 14
Induction Range (IR) Series
Induction Range (IR) Series
Electronics
2-14
#827176 - Revision A.2 - September, 2017
FIELD OPTION MODE
Field option modes allows the user to adjust or change
specific options of the oven.
User Preference Offset (UPO)
This allows the oven to offset a specific oven tempera-
ture ±35° in 1°F (±19° in 1°C) increments.
To initiate UPO mode (See Figure 2-7):
Touch and hold the CLOCK key for five seconds.
1
The current UPO is displayed on the selector knob.
2
Turn the selector knob to the left or right to increase
3
or decrease the UPO in 1° increments.
Changing Clock between 12 and 24 Hour Display
To change the display between 12 and 24 hour mode
(See Figure 2-8):
Touch and hold the CLOCK key for five seconds.
1
Touch CLOCK key to change from 24 hour to 12
2
hour display or from 12 hour to 24 hour display.
Touch ENTER key or allow the clock to time out
3
and set by default.
Clock Standby Power
The range is shipped in standby power mode which dis-
ables the clock approximately 10 minutes after the cool-
ing fan operation shuts off or the last key stroke on the
ECH. The clock illuminates after any touch of the con-
trols or oven use.
To enter Clock Standby Power (See Figure 2-9):
Touch and hold the CLOCK key for five seconds.
1
Touch STOP TIME key to toggle on or off clock
2
standby power.
Touch ENTER key or allow the clock to time out
3
and set by default.
Temperature Unit Selection
The oven can be changed between Fahrenheit and
Celsius temperature display.
To initiate temperature unit selection press and hold
1
the CLOCK key for five seconds.
Touch the COOKTIME key to change between °F
2
and °C.
Touch the ENTER key or allow the clock to time out
3
and set by default.
Figure 2-7. Field Option Mode and UPO
Figure 2-8. 12 and 24 Hour Display
Figure 2-9. Clock Standby Power
Figure 2-10. Temperature Unit Selection
12/24 Hour
Standby Power
Temp. Units
