Sturtevant Richmont Global 400, Руководство пользователя

Страница: 72 / 85

Global 400 User Manual 72 of 85 v1.1 revision 1
Chapter 7: EtherNet/IPTM 2 February 2016
2 – Job
Ignored if Item Number is 0.
Batch Reset USINT When this value changes, the batch counts of the currently running
parameter or group is reset.
Suspend BOOL When set, suspends the unit without stopping a running parameter, group,
or job.
Batch USINT Sets the batch size for the selected parameter. If Item Type is not 0
(Parameter), this value is ignored. If this value is 0, the parameter size
stored in the Global 400 will be used.
VIN SHORT_STRING Max length 100
Total size: 7-107 bytes
163
Name Data Type Description
Item Number UINT Instance number of item to run. Deactivate any running parameter, job,
or group if 0.
Item Type USINT Type of item to run:
0 - Parameter
1 – Group
2 – Job
Ignored if Item Number is 0.
Batch Reset USINT When this value changes, the batch counts of the currently running
parameter or group is reset.
Suspend BOOL When set, suspends the unit without stopping a running parameter, group,
or job.
Batch USINT Sets the batch size for the selected parameter. If Item Type is not 0
(Parameter), this value is ignored. If this value is 0, the parameter size
stored in the Global 400 will be used.
Total size: 6 bytes
Input (T->O) Connection Points
This section defines the connection points are used by Global 400 to send output data to the
network. The connection points are in the range 100-129 and are grouped by their content.
•
10x: Connection points provided for backwards compatibility with the Global 8. (Detailed in
the
Input Connection Points for Backwards Compatibility section later in this chapter)
•
11x: Last tightening data
•
12x: Current qualifier status
Input Connection Points for Last Tightening Data
The connection points in this group will contain data about the last tightening. As such, they are
not updated after a parameter, group, or job selection until a tightening occurs.
110
Name Data Type Description
Tightening ID UDINT ID number of the last tightening
Time DT Timestamp of the last tightening
Multi Sequence
Number UINT Sequence number of the running multi-parameter operation.
Multi Number UINT Instance number of multi-parameter operation (job or group) currently
running. Ignored if 0.