Sturtevant Richmont Global 400, Руководство пользователя

Страница: 18 / 85

Global 400 User Manual 18 of 85 v1.1 revision 1
Chapter 2: Using the unit 2 February 2016
The History screen shows some information about the tightenings stored in unit memory. More
information about the tightenings is not shown but is available via the network protocols. This
screen shows
•
Time – The time the tightening occurred. The date is indicated at the top of the table and
each time it changes in a white row.
•
T# – The tool number that produced the tightening
•
Param – The number and name of the parameter that produced the tightening
•
Count – The current batch count and batch size for the tightening
•
Torque – The torque of the tightening. This value is only provided for digital tools. The unit
of torque will be whatever the unit of the parameter that produced the tightening was at the
time.
•
Id – The tightening id number. This screen shows only the last 4 digits of the id number;
additional digits may be present in the network commands.
Unit Status
Figure 6: Unit Status screen
Function keys
1. GRAPH – When a single air tool is running, goes to the Rundown Graph screen. For other
tool types or when a group is running, this key has no function.
2. NETWORK – Go to the Network Status screen.
3. TOOL – Go to the Tool Status screen.
4. I/O – Go to the I/O State screen
The Unit Status screen shows some basic information about the current unit configuration that
may be useful for diagnostics purposes. Press ESC to return to the Run Screen
The average signal strength is for all tools learned to the unit and should be from 0 to -70 dBm.
If the signal strength is weaker, the unit may have frequent slow or failed communication. To
improve the signal strength, try bringing the unit and tools closer together, changing the XBEE
channel, or reducing sources of interference from the environment.
Last barcode shows the command number of the last barcode scanned (see Chapter 4: Serial
communications ) or an error if the last attempt barcode could not be processed. VIN and ID 2-4
show what will be included with tightenings in the associated result data fields.