Sturtevant Richmont Global 400, Руководство пользователя, Страница: 43 / 85

Global 400 User Manual 43 of 85 v1.1 revision 1
Chapter 3: Configuring the unit 2 February 2016
3. SAVE [ENT] – Keeps changes to the password and returns to the Unit Setup screen.
4. CANCEL [ESC] – Cancels changes made to the password and returns to the Unit Setup
screen.
The Enter new Password screen allows you to change the password to a string of up to 10 digits.
Note that the password entered on this screen will be shown in clear text as it is typed. Enter the
new password by typing the desired series of digits and pressing SAVE or ENT. The new
password will not be saved to permanent memory until saving from the Unit Setup screen .
If you decide not to change the password, press CANCEL or ESC.
You may completely remove the password from the unit by pressing REMOVE . Removing the
password will allow unrestricted access to all functions of the unit until a new password is
entered. If you only want to temporarily disable the password, use the
RETURN button as
described on the Main menu screen to return to the run screen.
Reset Defaults
Figure 44: Reset Defaults screen
Function keys
1. RESET ALL – Resets all configuration to factory defaults.
2. No function
3. RESET – Resets the selected parts of the configuration to factory defaults.
4. CANCEL [ESC] – Returns to the Unit Setup screen without resetting any configuration.
The Reset Defaults screen allows you to restore the unit to the factory defaults. You may select
some or all parts of the configuration to reset.
Resetting some parts of the configuration may invalidate other parts that are not being reset.
Resetting… May invalidate…
Tools Parameters, Groups, Jobs, Tightenings
Parameters Groups, Jobs, Tightenings
Groups Jobs, Tightenings
Jobs Tightenings
Unit Setup Tools
1
Network Setup none
Tightenings none
Events none
1
If the XBEE channel was changed from the default, the unit will go to the Channel Change screen to update the
tools back to the default XBEE channel when resetting the default qualifier settings.