/05.2015/
G35
5
EN
Transport, Installation
Area
Cause
Danger
Safety note
Under the unit
Defective lifting device
Bruising
Keep away from under the unit
Beside the unit
Uneven or insufficient
foundation or raised floor
stand
Bruising by tipping
over of the unit
Make sure, the foundation is even
and stable and that the raised floor
stand is correctly mounted. Wear
protective equipment (helmet,
gloves, safety shoes).
In the lower part of
the unit
Heat by soldering flame,
sharp edges, built-in parts
Burns, cuts, concus-
sion damage
Wear safety glasses and gloves,
don't put your head into the unit.
Electrical box
Connection cable under
voltage, sharp edges of
the openings for the cable
introduction
Electric shock, cable
damage at positioning
Check and make sure the unit is de-
energized. Stand on isolated ground.
Take care that sharp edges are al-
ways protected by rubber grommets
Start-up
Area
Cause
Danger
Safety note
In the lower part of
the unit, refrigerant
piping
Defective filling line for
refrigerant, leaks in the
refrigerant piping, closed
stop valves, defective
safety valve
Discharge of refrigerant
under high pressure,
burns in case of contact to
the skin, formation of acid
vapours with open flames
Open stop valves.
Wear safety glasses and
gloves, don't put your head
into the unit.
In the lower part
of the unit, water
piping
Leaks in the water lines,
closed stop valves
Discharge of water under
high pressure, contact with
the skin of ethylen glycol, irri-
tation of eyes and respiratory
system by glycol vapours,
increased risk of electric
shock in combination with
electricity, risk of slipping
Open stop valves.
Wear rubber gloves, ethylen
glycol is absorbed by the
skin. Avoid swallowing water
with glycol additives.
Electrical box
Short circuit
Electric arc, acid vapours
Retighten terminal connec-
tions,
Wear protective gloves
2. Residual risks
