Stulz ASD series, Оригинальное руководство пользователя

Страница: 69 / 72

3
© STULZ GmbH – all rights reserved EN/04.2017
electrical optioNS
11.5.2 Second Power Supply
This option provides the connection of a second power supply. Both power supplies are switched on to the
A/C unit. A contactor circuit ensures that the priority is set on power supply 1.
All three phases of both power supplies are checked constantly on excess voltage, undervoltage, phase fail-
ure, phase balance and correct rotation. In case of failure of supply 1 the unit is switched off. After a lapse of
time which can be set at the time relay (preadjusted: 10 seconds) power supply 2 is switched onto the unit.
The unit starts by the automatic restart which is integrated in the controller.
When the voltage of power supply returns, the unit is switched off again. On a second time relay a delay can
be set (preadjusted: 10 seconds), after which power supply 1 is switched onto the unit. The unit starts by the
automatic restart.
S4: Setting the limit values for undervoltage release
S5: Setting the limit values for excess voltage release
S6: Setting the limit values for phase imbalance
Function only for three-phase networks available.
S7: Setting the rotating field control
Function only for three-phase networks available.