Figure 4
Unloading the Carrier- Twin Outward Position
1.
Sit on a soft flat surface (like a bed) and with a safe place to set babies down where they are in no
danger of rolling off.
2.
Open the buckle and unbutton the leg portion. Lift out your baby with both hands, and set child
down in a safe location.
3.
Repeat on the opposite side.
4.
Take the carrier off like a jacket by only unsnapping the front buckles.
5.
Neatly fold or hang your carrier on a hanger to prevent straps from twisting and it will be ready to
go for the next use.
Loading single front carrier-for wearing one front, one back
Tip: The child that will be carried on the back will be lifted on from behind, similar to how one would put
on a backpack. Therefore, it is convenient to put the carrier on the rear riding child prior to putting on the
front riding child. Once the front child is on, it would be less convenient to have to adjust and put on the
second carrier.
1.
Place carrier face down in front of you with the straps up (and logo side down) on a flat surface.
The upside down logo is facing you.
2.
Open child strap buckle. Place child inside carrier, placing one leg in each leg hole.
3.
Fasten the snaps around the child’s legs. Use the tightest snap position possible (while still
comfortable) for optimal safety. Close the buckle.
4.
Fold down straps, and connect to same side buckle latches (as this rear carrier will be worn like a
backpack).
5.
Make sure child is resting in a secure spot (in no danger of falling) until you are ready to put on
the second carrier.
For wearing the single carrier in the front position, take the carrier and hold it to your chest. To have the
child face outward, make sure the TwinTrexx 2® logo is facing outward while the backwards logo faces
you. Close the snap on the front of the carrier so that logo that is inside (backwards) is now facing forward.
Toss one carrier strap over each shoulder, and cross them over the back to the opposite side. Reach around
and connect the buckle to the buckle latches on the opposite side so that the straps make an ‘x’ across the
back. Adjust the straps as necessary to fit snugly and comfortably.
1.
Place the child inside the carrier, placing one leg in each leg hole. Do not release your hold on the
child until he/she is securely seated inside the carrier.
2.
Fasten the snaps around the leg holes. Use the tightest snap position possible (while still
comfortable) for optimal safety. Buckle the child strap.
3.
Sit second child (already wearing carrier) up on couch or in a car seat.
