7
To completely remove the dichroic unit (I) operate as shown in the pictures below
1) Cut the two clamps (N)
2) Open the spring lock (S)
3) Unscrew the four screws (Q)
4) Remove the wire protection (U)
5) Open the other three spring lock (S) on the three side of the dichroic unit (I)
6) Unscrew and remove the wire protection (V)
7) Disconnect the connecter (Z) and remove the dichroic unit (I)
8) Put again the two clamps (N) once the dichroic unit installation has been made
N
I
S
Q
V
Z
screw
pict.8
pict.9
