Studio 54 ALEXANDER 10T TOUCH, Инструкция по эксплуатации

Страница: 13 / 46

13
Customized
TOUCH SCREEN DISPLAY USE
1. User interface
Hereafter the possible operating conditions:
-
“off”
(the device is not plugged in);
-
“stand
-
by”
(the device is plugged in and turned off);
-
“on”
(the device is plugged in, on and waiting for an operating cycle to start);
-
“run”
(the device is plugged in, on and running an operating cycle).
Then, with
“device power on”
we define the transition from
“stand by”
to
“on”
and with
“power off”
the transition from
“on”
to
“stand by”
.
If an interruption of the power source occurs during the
“stand by”
or the
“on”
operating condition, at the
reactivation the operating condition will be the same as before the interruption.
If an interruption of the power source occurs during the
“run”
operating condition, at the reactivation the
device will work in the following way:
- if a blast chilling or a deep freezing were running, the operating cycle will be restarted
taking account of the duration of the power source interruption;
- if the maintaining process was running, the cycle will restart with the same settings;
- if a slow cooking process was on, the cycle will restart from where it stopped.
If the interruption of the power source causes the
“RTC”
code (clock error), time and date must be reset.
You can find the time and date settings on the settings screen, service section.
Keys
Probe
Clock
Edit
Expert
Start cycle
Confirm
Cancel
Increase/decrease
Increase/decrease
Start
Stop
Info
Continue
Erase
Soft
Hard
Save
Alarm
After cooking deep freezing
After cooking blast chilling
recipes
save recipe