Studer Vista 1 Скачать руководство пользователя страница 396

Страница: 396 / 401

Vista 1 Digital Mixing System

1-20 Vista 1 FX

Document generated: 18.04.17

SW V5.3

Note :

Effect settings can only be copied within the same engine setup format (mono,

stereo, surround) !

The paste function will only be carried out when the target channel has the

same engine format as the source channel, or the setting stored in the clip-

board library.

If the format is not matching, the settings are not pasted into the target chan-

nel. No error message is displayed - the system will just be ready for a new

copy/paste operation.

9.3.8

snapshot operation

9.3.8.1

snapshots and presets

All necesarry settings to recreate any use of Vista FX can be stored is snap-

shots. In more detail, the following data is stored within each snapshot or

system preset :

* the engine setup

* patching of the effect input- and output ports

* choice of effect type

* effect parameter settings of the current state

Note :

The recalling of a snapshot or a preset can change the Vista FX engine setup

if this snapshot had been previously stored with a different engine setup.

In such a case where the engine setup is changed by a snapshot, unsaved effect

parameter settings can be overwritten.

Therefore it is important to keep in mind that the engine setup is of great

importance and should be set-up correctly at the start of a session and prefer-

rably not be changed anymore.

(Of course - a snapshot recall

undo

operation would bring back the unsaved

settings if a snapshot had been recalled by error.)

Important :

Manually changing the engine setup when the engine is in use, displays a

warning window. When performing the same change via a snapshot recall -

warninig window is displayed !

9.3.8.2

static automation

Global Snapshot filter

With the global snapshot filter, effect parameters can be isolated as any other

audio parameter in the system. This is done by editing the global snapshot

filter, and then touching any of the to be isolated parameter controls. Please

note that the isolation of

Category

and

Effect Type

parameters is always

linked.

Содержание Vista 1


















































































































































































































































































































































































































Результаты поиска

Содержание Vista 1

Отзывы:

Похожие инструкции для Vista 1

Бренды по названию

Популярные бренды

Studer Vista 1, Руководство по эксплуатации

Результаты поиска

Содержание Vista 1

Отзывы:

Похожие инструкции для Vista 1

Бренды по названию

Популярные бренды