Studer Vista 1 Скачать руководство пользователя страница 162

Страница: 162 / 401

Vista 1 Digital Mixing System

3-50 Parameters

Document generated: 18.04.17

SW V5.3

User setting

With the Microphone Simulation Tool, the mix engineer is able to set up his/

her own microphone simulation using the dialog box available in the Options/

VSP menu.

The settings may be changed as follows:

Microphone Positioning

The front left and right microphones may be moved by grabbing one of them

with the trackball and positioning it as desired. The opposite microphone

moves to a symmetrical location. The same may be done with the rear left

and right microphones. The center microphone cannot be moved.

Microphone Pattern

The front, center, and rear microphones may be independently changed as to

their polar characteristics. This may be done using the sliders. Each pattern

can be changed from omni-directional to shotgun.

Microphone angle

The Front and Rear microphones may also be independently changed as

to their positioning angle. This may be done using the angle sliders, or by

double-clicking and dragging with the mouse.

So when a VSP Channel Pan Mode is selected to the USER setting, the set-

tings within the Microphone Simulation Tool will be used as a basis for the

underlying VSP panning law. These settings may be changed in real time,

and the changes will be audible as they are being made. This is an exciting

and functional tool that the mix engineer now has exclusively with the use

of the VSP panning system within the Studer D950 or Vista consoles.

Содержание Vista 1


















































































































































































































































































































































































































Результаты поиска

Содержание Vista 1

Отзывы:

Похожие инструкции для Vista 1

Бренды по названию

Популярные бренды

Studer Vista 1, Руководство по эксплуатации

Результаты поиска

Содержание Vista 1

Отзывы:

Похожие инструкции для Vista 1

Бренды по названию

Популярные бренды