Studer Innotec SA
BSP
User manual
V1.3
17
6.3.6
Reset of battery history {6003}
At the installation of a new battery this parameter, if activated, will reset to zero all counters of the
section 5.2 and the SOC algorithm. The SOC graphical history, visible on the RCC, remains.
This parameter should normally not be used if the battery has not been changed,
because then the history (total current, estimated capacity) is lost.
6.3.7
Restore default settings {6004}
Use this parameter to restore the initial settings of the BSP.
If your installer has made some settings at "installer" level while commissioning your
installation, this function restores his settings and not the factory ones.
6.3.8
Restore factory settings {6005}
With this function, you can find the factory settings. For each parameter, not only the factory value
is restored but also the limits and the user level. This function is only accessible with the level
installer.
6.4
A
DVANCED SETTINGS
{6016}
Parameters used for advanced configuration of the BSP.
6.4.1
Reset of user counters {6031}
This parameter allows to reset to zero the charge, discharge and time user counters of the section
5.2.
6.4.2
Manufacturer SOC for 0 % displayed {6055}
6.4.3
Manufacturer SOC for 100 % displayed {6056}
The capacity given by the battery manufacturer conforms to a discharge test that is not
representative for the recommended conditions of use. These two parameters define the SOC
range corresponding to the manufacturer's test giving a display in between 0 and 100%.
For instance, if the maximum discharge rate is set to 30%
with the parameter {6055}, the BSP will display a value of 0
% when arriving at this level. The manufacturer's charge
rate consists of tens of hours in the absorption phase. If a
battery is considered full to 90 % at this charge level, use
this value to set parameter {6036}. When arriving at this
level the BSP will display 100 %.
The displayed state of charge (SOC) is also the one used
by the Xtender to calculate the remaining autonomy and
for logged data.
State of charge
Manufacturer SOC
