Studer BSP 1200, Руководство пользователя

Страница: 9 / 28

Studer Innotec SA
BSP
User Manual V1.0.3 9
1.3.2. Exclusion of warranty
No warranty will be applied for damages caused by handling, operation or actions that are not described in
this manual. Damages arisen from the following events are not covered by the warranty:
• Overvoltage on the device (Applying a voltage higher than ? Vdc).
• Reverse polarity while connecting the battery.
• Liquid in the device or oxidation due to condensation.
• Failures due to a fall or to a mechanical shock.
• Modifications made without the explicit authorization of Studer Innotec SA.
• Nuts or screws partially or insufficiently tight during installation or maintenance.
• Damages due to atmospheric overvoltage (lightning).
• Damages due to transport or improper packaging.
• Disappearing of original marking items.
1.3.3. Exclusion of liability
Installation, commissionning, use and maintenance of this device can not be supervised by the company
Studer Innotec SA. For this reason, we do not accept any liability for the damages, the costs or the losses
generated either by an installation that is not conforming to the prescriptions, by a defectuous operation or
by a poor maintenance. The use of this device is under the responsibility of the end-user. This device is
neither designed nor guaranteed for the supply of life support applications or any other critical application with
potential risks for human beings of for the environment. We shall assume no liability for patent infringement
or other third party rights involved in the use of this device.
1.4. Safety precautions
1.4.1. Generalities
Do read carefully all safety instructions before proceeding to the installation and commissionning of the
device. Not respecting these instructions might constitute a lethal physical danger but can also damage the
functionnalities of the device. Therefore do keep this manual close to the device.
Do, for any installation, follow strictly the local and national norms and regulations in
force.
1.4.2. Warnings
Danger of electrical shock!
• This device is used together with a permanent energy source (battery bank) and can also receive an
alternative source at its input. Before any handling it is then necessary to disconnect all energy sources
from the device.
• Never use this device in a place where explosions might occur. Do refer to the indications of the battery
manufacturer to ensure of the compatibility of the battery with the device. The safety instructions of the
battery manufacturer have to be followed striclty too!
• Wherever the installation, the person in charge of installation and commissionning must know perfectly the
safety measures and the prescriptions in force in the country. Therefore, the whole maintenance must be
carried out by a qualified staff.