background image

 

4

Before Use 

 
1. 

Choose unit installation location carefully. Avoid placing it in direct sunlight or close to a source 
of heat. Also avoid locations subject to vibrations and excessive dust, cold or moisture. Keep 
away from sources that hum, such as transformers or motors. 

2. 

Do not open the cabinet as this might result in damage to the circuitry or electrical shock, if a 
foreign object should get into the set, contact your dealer. 

3.  Be sure not to handle discs with dirty fingers. Never insert a disc that has a crack on the 

surface. 

4. 

When removing the power plug from the wall outlet, always pull directly on the plug, never pull 
the cord. 

5. 

To keep the laser pickup clean, do not touch it, and do not forget to close the disc tray. 

6. 

Do not attempt to clean the unit with chemical solvents as this might damage the finish. Use a 
clean, dry cloth. 

7. 

Keep this manual in a safe place for future reference. 

 

Beware of Condensation 

When the radio is moved from a cold or warm place, or is used after a sudden temperature change, 
there is a danger of condensation. Water vapor in the air could condense on the mechanism. To 
prevent this, if you are going to use the radio in a condition where condensation could occur, you 
should leave the radio for 1 or 2 hours after plugging it into an AC outlet depending on the amount 
of condensation. If this is done, the radio will stabilize at the temperature of its surroundings. 

 
 
LOCATION OF CONTROLS 

 
1. VOLUME/POWER ON/OFF KNOB 
2. LED DISPLAY 
3. OPEN/CLOSE BUTTON 
4. F.R BUTTON 
5. F.F BUTTON 
6. STOP BUTTON 
7. PLAY/PAUSE BUTTON 
8. CD BUTTON 
9. PHONO BUTTON 
10. AM BUTTON 
11. FM BUTTON 
12. RADIO DIAL SCALE 
13. FM STEREO INDICATOR 
14. TUNING BUTTON 
15. FM ANTENNA 
16. POWER CORD 
17. CASSETTE PLAYER 
 
 

 
 
  18. ADAPTER FOR 45 RPM RECORDS 

19. TONE ARM 
20. SPEED CONTROL SWITCH 
21. SECURITY HOOK 
22. TONE ARM REST 
23. TURNTABLE 
24. LARGE CHROME SCREW 
25. QUE-LEVER 

 

 

17 

Содержание Studebaker SB6060













Отзывы: