background image

 

10

Troubleshooting Guide 

If you experience difficulties in the use of this music system, please check the followings or call at  

1-800-777-5331 for Customer Service and Support.                    

 

 

 

 

 

 

 

 

 

Problem Cause  Solution 

Power does not come on 

when the power switch is 

pressed. 

Unit is 

unplugged. 

Connect the unit to the AC 

power supply. 

No sound comes out of the 

speakers. 

The volume is turned down (to MIN).

The input selector does not match 

the playback source. 

Adjust the volume. 

Re-select the desired input 

source. 

THE WHOLE

 UNIT 

The sound is noisy. 

The unit is too close to a TV set or 

another similar appliance. 

Turn off the TV or other 

appliance, and relocate the

 

unit. 

The cassette deck door 

cannot be closed. 

The cassette tape is not inserted 

properly. 

Insert the cassette tape 

correctly. 

The tape does not move. 

The cassette tape is not inserted 

properly. 

The tape has reached the end. 

Insert the cassette tape 

correctly. 

Flip the cassette. 

No sound from tape. 

The tape heads are dirty. 

Clean the tape heads. 

T

APE DECK

 

 

The sound is distorted or 

faint. 

The tape heads are dirty. 

Clean the tape heads. 

Cannot listen to any station, 

or signal appears weak. 

 

The station is not tuned-in properly. 

A TV set is being used nearby and is 

interfering with the radio reception. 

Properly tune-in the desired 

station. 

Turn-off the interfering TV set. 

TUNE

R U

N

IT

 

 

The sound is distorted. 

 

The antenna is not oriented properly.

Re-orient the antenna until 

reception improves. 

CD stops immediately after 

starting, or unit pauses or 

stops during play.  

The CD is inserted upside down. 

The CD is dusty or dirty or there is 

condensation on the CD. 

Insert the CD with the printed 

side right-side up. 

Carefully clean and dry the CD. 

No sound. 

The CD player is paused. 

Press the PLAY/PAUSE button. 

CD PLA

Y

E

R

 

 

Specific CD is noisy, or 

playback stops or skips. 

 

The CD is scratched, damaged or 

warped. 

The disc is very dirty. 

The CD should be changed. 

Carefully clean the CD. 

 

Содержание Studebaker SB6060













Отзывы: