background image

 

11

COMPLIANCE WITH FCC REGULATIONS 

This equipment has been tested and found to comply with the limits for a Class B Digital Device, 

pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection 

against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications. However, there is no guarantee that interference 

will not occur in a particular installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

-  Increase the separation between the equipment and receiver. 

-  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

Consult the dealer or an experienced radio technician for help. 

 
 

WARNING

  

Changes or modifications to this unit not expressly approved by the party responsible for 
compliance could void the user’s authority to operate the equipment. 

 

                                      

SERVICE 

Please refer to the instructions on the enclosed warranty card for returning your unit for service.   

 

Distributed by: 

Spectra Merchandising International, Inc. 

Chicago Industry Tech Park 

4230 North Normandy Avenue 

Chicago, IL 60634, U.S.A. 

Please have model number ready, for Customer Service, call 1-800-777-5331

               

        

 
 
 
          

         

Printed in China             

 
 

 

Содержание Studebaker SB6060













Отзывы: