Transport, Storage and Disposal
4.1.2
Lifting
DANGER
Death or limbs crushed as a result transported items
falling over!
Use lifting gear appropriate for the total weight to be trans-
ported.
Attach lifting gear in accordance with the following dia-
grams.
Never use the lifting eye of the motor as the attachment
point for lifting the entire pump (the lifting eye of the motor
may be used for securing a pump assembly with a high
center of gravity against being knocked over).
Do not stand under suspended loads.
Fig. 4
Schematic: Attaching lifting gear to the pump unit
1. Attach lifting gear in accordance with the following dia-
grams.
2. Lift the pump/pump assembly appropriately.
4.2
Storage
NOTE
Material damage due to inappropriate storage!
Store the pump properly.
1. Seal all openings with blind flanges, blind plugs or plastic
covers.
2. Make sure the storage room meets the following condi-
tions:
–
Dry
–
Frost-free
–
Vibration-free
–
UV protected
3. Rotate the pump shaft twice a month.
4. Make sure the shaft and bearing change their rotational
position in the process.
4.3
Disposal
Plastic parts can be contaminated by poisonous or radioac-
tive pumped liquids to such an extent that cleaning will be
insufficient.
WARNING
Risk of poisoning and environmental damage by the
pumped liquid or oil!
Use personal protective equipment when carrying out any
work on the pump.
Prior to the disposal of the pump:
–
Collect and damage any escaping pumped liquid or oil
in accordance with local regulations.
–
Neutralize residues of pumped liquid in the pump.
Remove plastic parts and damage them in accordance with
local regulations.
Dispose of the pump in accordance with local regulations.
300 092
BA-2018.08.21 EN
SHM
13
