Instruction Sheet
- Jet Boostamatic (CM) Pumps -
The following information is to be read in conjunction with operation booklets, supplied
with the pump and control module.
IMPORTANT NOTES
z
Please read these instructions fully before starting the
installation.
z
The installation must comply with the relevant water supply,
electrical and building regulations and be installed by a
competent person.
z
If in doubt, consult Stuart Turner Ltd.
Congratulations on purchasing the Jet pump and Control Module.
The complete assembly has been factory tested and is pre-wired. All you need to do is
re-assemble the Control Module on the pump and it is ready to go.
Stuart Turner Ltd, Henley-on-Thames, Oxfordshire RG9 2AD ENGLAND
Tel: +44 (0) 1491 572655, Fax: +44 (0) 1491 573704
[email protected] www.stuart-turner.co.uk
Control module
Adaptor upper (pre-fitted)
Note: Ensure retained rubber
seal is fitted in adaptor
Adaptor locking ring
Adaptor lower (pre-fitted)
Jet pump
Supply cable (pre-fitted)
Link cable (pre-fitted)
Issue No. 3914/1-01
Pt. No. 19982
