Stuart Jet 55-45, Инструкция по установке, эксплуатации и обслуживанию

Страница: 13 / 21

- 13 -
6 TECHNICAL SPECIFICATION
Stuart Turner reserve the right to amend the specification in line with its policy of
continuous development of its products.
*Note: Max working pressure is the maximum pressure that can be applied to the pump internal casing under
any installation conditions.
**Note: With footvalve fitted.
Although these pumps are self priming we recommend a footvalve/strainer is used if a suction lift is
required.
6.11 Noise: The equivalent continuous A-weighted sound pressure level at a
distance of 1 metre from the pump does not exceed 73 dB(A) for Jet 55-45 or
76 dB(A) for Jet 80-45.
Pump Model
Jet 55-45
50 Hz
46587
Jet 80-45
50 Hz
46588
General Guarantee 1 year
Features Pump type Centrifugal
Mechanical seal EPDM / Carbon / Ceramic
Self priming ü ü
Carry handle ü ü
Integral on/off switch ü ü
Quiet operation ü ü
Materials Pump body Stainless steel
Impeller Plastic
Performance Maximum head (closed valve) 4.5 bar 4.5 bar
Performance @ 10 l/min 3.5 bar 3.8 bar
Performance @ 40 l/min 1.6 bar 2.7 bar
Maximum flow 55 l/min 80 l/min
Manimum static inlet pressure 0.1 bar (1 metre)
Maximum static inlet pressure 0.5 bar (5 metres)
Maximum working pressure* 500 kPa (5 bar)
Maximum ambient air temperature 40 o C
Min / Max water temperature Min 4 o C / Max 35 o C
Maximum suction lift** 5 metres
Connections Pump connections G 1 female (inlet), G 1 female (outlet)
Motor Type Induction, auto-reset thermal trip
Duty rating Continuous (S1)
Electrical Power supply / phase / frequency 230 V a.c. / 1 / 50 Hz
Current (full load) 2.9 Amps 5.2 Amps
Power consumption 640 Watts 925 Watts
Fuse rating 13 Amps
Power cable (pre-wired) 1.5 metres
Physical Enclosure protection IPX4
Length 341 mm 368 mm
Width 217 mm 224 mm
Height (excluding hoses) 238 mm
Weight (including fittings) 6.9 Kg 9.1 Kg