- 21 -
Cont ...
9.12
Protective Logic Sequence:
If water starvation occurs and the power supply to the pump remains
uninterrupted, the pump controller will perform the following protective
sequence.
1. If the pump detects water starvation, it will stop operation, the time taken to
stop will be system dependent but typically 3-5 minutes.
2. The red ‘Error’ light will illuminate on the front panel.
3. Allow time for the tank to refill or resolve the water supply problem.
4. Press and hold the ‘Reset’ button for 2 seconds.
5. The pump will re-start and function provided the water supply is maintained.
During the re-start the nearest/lowest outlet in the system that the iBoost is
connected to may have to be opened to allow the air to vent from the pump.
6. If the iBoost fails to operate after water starvation, then please consult the
PumpAssist team on +44 (0) 800 31 969 80.
9.13
Environment Protection:
Your appliance contains valuable materials which
can be recovered or recycled.
At the end of the products’ useful life, please leave it at an appropriate local civic
waste collection point.