Stryker X8000, Руководство пользователя

Страница: 8 / 32

6
W
ARNING
T
HE SCOPE TIP
,
SCOPE LIGHT POST
,
LIGHT CABLE ADAPTER
,
AND
LIGHT CABLE TIP WILL TAKE SEVERAL MINUTES TO COOL OFF
AFTER BEING PLACED IN STANDBY MODE AND THEREFORE MAY
STILL RESULT IN FIRE AND
/
OR BURNS TO THE PATIENT
,
USER
,
OR
AN INANIMATE OBJECT IF NOT USED PROPERLY
. D
O NOT PLACE
THE SCOPE OR THE LIGHT CABLE ON THE PATIENT OR ON THE
DRAPES OR OTHER FLAMMABLE MATERIAL
,
EVEN WHEN THE
DEVICE IS IN STANDBY MODE
.
The Stryker X8000 Light Source consists of one of each of the following:
• light source console
• power cord
• xenon bulb module (spare or replacement bulb modules can be
purchased separately as P/N 220-201-000)
The features of the X8000 console are described below (see Figures 1 and 2).
Figure 1 Front panel of the X8000 console
1. Power Button : Powers the unit on and off.
2. Standby LED : Illuminates when the unit is operating in the Standby
mode. In Standby mode, light output is reduced to a minimum level.
3. Mode Button : Selects either Standby or Run mode when pressed.
Standby is the default mode when the light source is powered on.
4. Run LED : Illuminates when the unit is operating in the Run mode. In
Run mode, light output is determined by the up and down switches.
5. LCD : Indicates the light intensity level (0-100%), bulb hours and
language.
1
5 7
9 8
6
3
2
4