54
Playback
Playing Back a Disc
It is possible to playback a disc recorded on this DVD recorder.
Playback operation may vary according to whether finalization has been performed.
OPERATE
PHONES
REV
STOP
PLAY
FWD
PAUSE
REC
BUSY
OPEN/CLOSE
TOP
MENU
MENU
OPTION DV
Y/C LINE
SET UP
AUDIO
CH1
CH2
TITLE
DOLBY DIGITAL
LPCM MPEG
CHAPTER
SET
Operation
1.
Insert the disc.
2.
Play the disc.
Press the PLAY button.
●
The final title is played.
3.
Select still mode.
Press the PAUSE button.
●
The machine enters still mode.
●
If the PAUSE button is then pressed again in Still mode, the DVD
recorder will advance playback by a single frame.
4.
Restart the play.
Press the PLAY button.
Upon reaching a title end, it will automatically jump to the next title
and play back all titles.
When disc end is reached it will automatically enter stop mode.
The stop position will return to the beginning of the last title.
5.
To manually stop playback press the STOP button.
When the STOP button is pressed, the stop position will be registered
and the next playback will start from the same position. (Resume feature)
PLAY button
STOP button
PAUSE button
Playing Back a Disc before Finalizing
Clearing Resume Data
●
When the PLAYBACK&232C TYPE item on
the SYSTEM MENU (1/2) screen is set to
DVD, resume data will be cleared and the stop
position will return to the beginning of the last
title if the STOP button is pressed when in
the Stop mode.
●
When the PLAYBACK&232C TYPE item is set
to VTR, resume data will not be cleared even
if the STOP button is pressed when in the
Stop mode.
●
Resume data will be cleared upon ejecting
the disc.
Playing Back a Finalized Disc
When a disc is finalized, its title menu will be used to create the top menu.
The action taken by this DVD recorder when a disc it has finalized is inserted or when playback of a title has ended will depend on
the settings of DISC IN ACTION and TITLE END as set on the DVD MENU screen during recording.
* Playback may not proceed smoothly with discs recorded using different devices, regardless of whether or not they have been finalized.
1.
Insert a disc.
Depending upon the DISC IN ACTION item settings of the DVD MENU screen during recording, the operation will differ.
Operate in accordance with the table below.
STOP
Cursor buttons
PLAY button
PAUSE
SET button
OPERATE
PHONES
REV
STOP
PLAY
FWD
PAUSE
REC
BUSY
OPEN/CLOSE
TOP
MENU
MENU
OPTION DV
Y/C LINE
SET UP
AUDIO
CH1
CH2
TITLE
DOLBY DIGITAL
LPCM MPEG
CHAPTER
SET
55
4.
Set to Still mode.
This is done by pressing the PAUSE button.
●
The DVD recorder enters Still mode.
●
If the PAUSE button is then pressed again in Still mode, the DVD recorder will advance playback by a single frame.
5.
Restart playback.
Press the PLAY button.
The DVD recorder will behave as follows when title playback has ended.
These actions will depend on the setting made for TITLE END from the DVD MENU screen during recording.
6.
Stop playback.
This is done by pressing the STOP button.
●
The DVD recorder enters Stop mode.
●
When the STOP button is pressed, the stop position will be registered and the next playback will start from the same position.
(Resume feature)
TITLE END item setting during recording
Set to MENU
Set to REPEAT
Set to STOP
Set to NEXT TITLE
Enters stop mode and the title
menu (TOP MENU) is displayed.
DISC IN ACTION setting made during recording
MENU
TITLE
The title menu (TOP MENU) will appear
2.
Select the number of the title to be played.
Use the
t
,
8
,
7
, and
6
buttons to select the title number
for playback.
3.
Press the SET button to begin playback.
Playback starts automatically from the first title.
Repeats playback within the
title.
Enters the stop mode. The title
menu (TOP MENU) is not
displayed.
Stops at the beginning of the
first title.
Next title is played. When
playback of the final title
finished, the first title is played.
(Disc repeat playback)
Clearing Resume Data
●
Resume data will be cleared upon ejecting the disc.
Precaution regarding the playback
●
During playback of a disc, if the input setting is DV then the sound can be delayed. In this case, change the input setting to LINE
or Y/C.
●
If the disc is dirty or damaged good playback may not be possible. In this case either clean the disc or change it.
●
When playing back an unfinalized disc containing mixed data such as screen aspect ratio of 4:3, squeezed, and letterbox
format or a menuless disc, the wide information is not always correctly output.
A Disc Set with No Menu
If a disc with DVD MENU TYPE item of the DVD MENU screen set to NONE is inserted, the title 1 will automatically play.
When the end of the title is reached the next title will be played.
