Stryker 2236-000-002 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 30

Stryker 2236-000-002 Скачать руководство пользователя страница 5

www.stryker.com

2236-009-101 REV B

5

Return To Table of Contents

Introduction

INTENDED USE

This manual is designed to assist you with the safe operation and maintenance of the Stryker Air I and Stryker Air II,
Low Air Loss (LAL) mattress system. Carefully read this manual thoroughly before using the equipment or beginning
maintenance on it. To ensure safe operation of this equipment, it is recommended that methods and procedures be
established for educating and training staff on the safe operation of this Arise® mattress system.

This high quality medical product, when properly installed and cared for will provide many years of trouble free service,
and outstanding clinical performance.

PRODUCT DESCRIPTION

The Stryker Air I is an LAL mattress replacement system and the Stryker Air II is an LAL mattress overlay system. Both
are a unique therapy system that provides pressure relief by combining low air loss with pulsation. Low air loss therapy
has been demonstrated to reduce the risk of pressure ulcers as well as being a valuable aid in the treatment of pressure
ulcers.

The Stryker Air I and II mattress system is suitable for both the treatment of existing pressure ulcers stage I through
stage IV as well as those who have been assessed at risk from the complications of immobility. The Stryker Air I and
II are quiet, comfortable and simple enough for single caregiver installation, featuring rapid inflation in just three to five
minutes. The user-friendly controls allow for easy adjustment of patient comfort. The Stryker Air I and II mattress system
offers special features to increase peace of mind such as a power interruption alarm and a patient position sensor which
optimizes support for seated patients (Fowler Boost).

Additionally, low friction and shear materials, together with average interface pressures below capillary closure levels
(32mm of Mercury), means that the Stryker Air I and II mattress system meets the comfort and clinical requirements.

«
...
3
4
5
6
7
...
»

Содержание 2236-000-002































Отзывы:

Нет отзывов