Stryker 2236-000-002 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 30

Stryker 2236-000-002 Скачать руководство пользователя страница 16

16

2236-009-101 REV B

www.stryker.com

Return To Table of Contents

Operation Guide

CPR

The hose connection at the control unit is marked CPR. Disconnect the hose from the control unit. CPR connection style
may vary by model. To re-inflate the air cells, reattach the hose to the control unit.

TRANSPORT

To transport the patient in bed, turn the control unit off. Unplug the power cord from the outlet. Do not disconnect the
hose connection at the control unit. The lower support cell will prevent the patient from bottoming out for up to 12 hours.
Some models incorporate a foam safety cell.

POWER FAILURE

After a power failure the unit will start up in

Standby

mode. Reset the preferred mode and comfort level as described on

. In the event of a power failure, the lower support cells will hold air for up to 12 hours. Some models incorporate

a foam safety cell. In case of an extended power failure, transfer the patient to a hospital mattress or other surface.

CAIRRAILS

Integrated CairRails risk management air bolsters offer a bilateral side bolster solution designed to address healthcare’s
growing concerns of liability in relation to patient falls and entrapment. CairRails are being recognized by some of the
nations leading healthcare systems for improving their patient safety and risk management programs.

CairRails are recommended for patients requiring additional support during patient care and transfer. CairRails can help
reduce costs while ensuring optimal clinical outcomes and increasing patient safety.
Note:

When inflating CairRails, it is recommended that the control unit be in Autofirm mode to achieve optimal results.

Features and Benefits
•  A bilateral side air bolster solution which can enhance your facilities entrapment/risk management program.
•  Easy to engage Ready Valve for instant inflation and deflation.
•  Transfer friendly-deflate for ease of assisted transfer or when bolsters are not required.
•  Unique contoured design allows ease of ingress/egress, while providing additional protection, comfort and supports

patient compliance.

• Designed to fit on most therapeutic support surfaces.
• Promotes maximum independence by allowing caregiver to decide when added protection is required.

Note: Side bolsters are meant to be used with side rails and to provide a documentable and functional intervention for
the risk management issues of falls and entrapment but in no way guarantees the prevention of falls or entrapment
occurrences.

«
...
14
15
16
17
18
...
»

Содержание 2236-000-002































Отзывы:

Нет отзывов