Stryker 1688 Series Скачать руководство пользователя страница 17

Страница: 17 / 68

Device Compatibility

For optimal use, the 1688 Video Camera is designed to work with the L11 LED

Light Source (0220230300) and the Connected OR Hub (0240200100) with

software version 1.2.1 or higher. All features and instructions described in this

user manual apply to this system unless otherwise noted.
The 1688 Video Camera is also compatible with other light sources and digital

capture devices that are listed below. The features and instructions that are

different than the rest of this user manual are noted below. Please contact a

Stryker representative for assistance with alternate system configurations.

Alternate Light Sources

0220220300

L10 LED Light Source with AIM Technology

•

Connect to the camera console using the USB A-to-A

cable provided with light source, P30883 (required to

use ENV mode)

•

Auto Light function is not available

•

Overlay mode and Contrast mode (SPY modes) are not

available (although ENV mode is still available)

•

No camera control over ENV laser level (although the

camera can control the Backlight level)

•

No camera control over IRIS mode and settings

•

Some display monitor menu options are not available

(options that appear in grey)

0220220000

Precision LED Light Source

•

Connect to the camera console using the USB A-to-A

cable provided with light source, P30883

•

Auto Light function is not available

•

SPY and IRIS modes are not available

•

Some display monitor menu options are not available

(options that appear in grey)

0220210000

L9000 LED Light Source

•

Connect to the camera console with a USB A-to-B cable

•

No camera control of light levels (only activate/

deactivate)

•

Auto Light function is not available

•

SPY and IRIS modes are not available

•

Some display monitor menu options are not available

(options that appear in grey)

Содержание 1688 Series





































































Результаты поиска

Содержание 1688 Series

Отзывы:

Stryker 1688 Series, Руководство пользователя, Страница: 17 / 68

Результаты поиска

Содержание 1688 Series

Отзывы: