9.4
Daily
WARNING
Do not operate the machine if there are visible cracks or damage to the unit.
1.
Clean the machine with a soft, slightly damp cloth and a mild detergent.
2.
Make sure that electrolyte spills on the front plate or other parts of the cabinet are wiped off.
3.
Keep the work surface under and around the machine clean.
Make sure that electrolyte spills are wiped off.
9.4.1
The pump system and polishing pistol holder
Clean the pump system and polishing pistol holder with water at least daily.
1.
Clean the polishing pistol holder.
–
Place the polishing pistol in the holder and press
Start
.
–
Press
Stop
.
The pump runs for the time that has been set in
Post-process clean-up
time
to empty electrolyte from the holder.
2.
Use a soft, slightly damp cloth to wipe up any drips of electrolyte from the
pistol and the holder.
3.
Fill an electrolyte cartridge with water.
4.
From the
Main menu
screen, select
Maintenance
.
5.
Select
Cleaning
.
6.
Follow the on screen instructions.
1.
Insert a cartridge with water and close the door.
2.
Press the polishing pistol against the sample and start the pump by the pistol or start button.
3.
Open the door to the electrolyte compartment.
4.
Remove the present electrolyte.
5.
Please wait for 9 sec.
6.
Open the door and remove the cartridge with water.
7.
Clean and dry the anode before storage.
9.5
Weekly
WARNING
Do not operate the machine if there are visible cracks or damage to the unit.
9 Maintenance and service - MoviPol-5
MoviPol-5
47
