When the battery pack is inserted in the machine, the equipment can be connected directly to the
electrical power supply through the battery charger.
Connecting the battery charger
1.
Make sure that the battery pack is inserted in the
machine.
2.
Unscrew the cover covering the socket. (
A
)
3.
Insert the plug from the battery charger into the
socket. (
B
)
4.
Connect the battery charger to the electrical
power supply.
Connecting the battery charger to the electrical power supply
The electrical power supply cable is fitted on both ends with an IEC 320 cable.
1.
Connect the cable to the charger.
2.
Connect the battery charger to the electrical
power supply.
5.4.2
Inserting the battery pack
CAUTION
Make sure that the actual electrical power supply voltage corresponds to the
voltage stated on the type plate of the battery pack.
Incorrect voltage can damage the electrical circuit.
Hint
See the Instruction Manual for this unit.
Note
Make sure that the battery pack is fully charged prior to use.
Note
The battery pack does not need to be inserted during charging.
When the battery pack is inserted in the machine, the equipment can be connected directly to the
electrical power supply through the battery charger.
5 Installation
MoviPol-5
23
