Struers Abramin, Инструкция по эксплуатации

Страница: 3 / 137

Abramin
Instruction Manual
Abramin
Safety Precaution Sheet
To be read carefully
before use
1. The operator should be fully aware of the use of the machine according to
the Instruction Manual. The machine must be placed in an adequate
working position.
2. Be sure that the actual voltage corresponds to the voltage stated on the
back of the machine. The machine must be earthed.
3. Be sure that the water connections do not leak.
4. Keep clear of the rotational disc when operating. Be careful that you do not
hurt your fingers/knuckles (the cooling water will prevent you feeling any
pain while the injury is done!). Do not drop the sample while grinding.
5. Struers recommend that the mains water supply is shut off or disconnected
if the machine is to be left unattended.
6. If you observe malfunctions or hear unusual noises - stop the apparatus
and call technical service.
The equipment should only be used for its intended purpose and as detailed in the Instruction Manual.
The equipment is designed for use with consumables supplied by Struers. If subjected to misuse, improper
installation, alteration, neglect, accident or improper repair, Struers will accept no responsibility for
damage(s) to the user or the equipment.
Dismantling of any part of the equipment, during service or repair, should always be performed by a qualified
technician (electromechanical, electronic, mechanical, pneumatic, etc.).