Struers Abramin, Инструкция по эксплуатации

Страница: 13 / 137

Abramin
Instruction Manual
9
5. Installation
1
Abramin
1 Set of Instruction Manuals
100 Process cards
1
Protection ring of PVC
1 Lid for protection ring of PVC
1 Lubricant bottles, 250 ml
1 Lubricant stopper
1 Outlet tube 1" x 1.5 m
1 Elbow pipe for outlet (PVC)
3 Hose clips, 30 mm
1 Reinforced tube for compressed air, ¼" x 3 m
1 Hose connection for compressed air
2 Hose clips, 12 mm
1 Hose connection
1 Union for hose connection
1 Gasket for hose connection
1 Hose clip, 13 mm
1 Allen key, 6 mm
1 Allen key, 2.5 mm
1 Grease gun for spindle
Abramin is secured by 4 bolts to a base frame in the packing case.
Abramin can be taken off the base frame, using the pipe wrench (13
mm), after which it can be placed where it will be used.
Connect the reinforced compressed-air tube to the branch at the
back of the apparatus (see fig. 3.

in the Spare Parts manual), use
hose clamp (12 mm). Abramin is equipped with a water separator
with filter and, therefore, no extra air purification is necessary.
Feed supply pressure should be 6 bar and can be supplied either
from the central compressor, portable compressor with compressed
air reservoir or compressed-air bottle. A capacity of 15 l/min at
atmospheric pressure is sufficient.
Contents of Packing Box
Unpacking/ Removal
of Transport Fittings
Note:
The Figures referred to in this manual can be found
in the Spare Parts and Diagrams section.
Connection to Compressed-air