Structural Concepts CDR4694 Скачать руководство пользователя страница 8

Страница: 8 / 22

START-UP AND OPERATION, CONTINUED: LIGHT SWITCHES [FRONT] - PAGE 1 of 2

OFF

Rocker Switch

Cap

Plug

Receptacle

Start-Up And Operation, Continued

Warning! Disconnect power before providing
maintenance and service to unit.

Caution: Lamps have been treated to resist breakage
and must be replaced with similarly treated lamps.

Note: Warranty will be void if claims arise from
negligence, misuse of goods, extreme environmental
conditions or improper maintenance. See Overview
And Warnings section in this operating manual.

1. Units Without Light Switches



Lighting components may be field-wired to

electrical box.



In such instances, lighting will be operational upon

proper field wiring of case.

2. Units With Light Switches

Front Light Switch Accessible Units:



Light switch is located on the right-front of the unit.
Rotate the round cover plate to access the switch.



All of the lights should come on at the same time. First
time lighting may require a short warm up period for
the bulbs.



Slightly dim or a flickering of new bulbs is normal. If
lights do not turn on, check all of the raceway plugs.



The lighting is wired in series so

all lights must be

plugged in or receptacles capped

in order for the

case to light.



See illustration at lower-right.

Front Light

Switch

Note: Illustrations shown may not

exactly reflect every feature or

option of your particular case.

Содержание CDR4694























Результаты поиска

Содержание CDR4694

Отзывы:

Похожие инструкции для CDR4694

Бренды по названию

Популярные бренды

Structural Concepts CDR4694, Инструкция по установке и эксплуатации

Результаты поиска

Содержание CDR4694

Отзывы:

Похожие инструкции для CDR4694

Бренды по названию

Популярные бренды